Please note images are for illustrative purposes only. Whilst we exercise every care to provide accurate images, they may not show the exact variation listed below.
Trend LOCK/JIG Lock Jig
6 people have viewed this page in the last 24 hours
Description
Trend LOCK/JIG Lock Jig This new jig uses a set of interchangeable templates and with a router will cut the mortice and face-plate recess for popular door locks. The jig requires a router fitted with a 30mm guide bush and 12mm diameter long reach cutter. For most common sash mortice and dead locks, with up to 2 1/2" deep mortises and a 7/8" or 1" face-plate. Deeper mortises can be achieved with a suitable size of auger bit. Also suits face-plate on a 1" mortice latch. Fast, clean and accurate results, even in hardwood and doors with knots. Can be used with locks having the following Face-plate dimensions: Imperial...................Metric...............Template 7/8" x 6 1/8"........22.2 x 156mm.............1 7/8" x 6"...............22.5 x 152.5mm.........2 1" x 4 3/4"...........25.4 x 121mm.............3 1" x 5"..................25.4 x 127.5mm.........4 1" x 5 1/4"...........25.4 x 133.5mm..........5 1" x 5 3/4"...........25.4 x 145mm.............6 1" x 6".................25.4 x 153mm.............7 1" x 6 1/8"..........25.4 x 156mm..............8 1" x 6 1/2"..........25.4 x 165.5mm...........9 1" x 7".................25.4 x 177mm...........10 1" x 2 1/4"..........25 x 57.5mm..............11 UPPER 1" x 2 1/4"..........25.6 x 56.5mm...........11 LOWER 1" x 6 3/8"..........25.6 x 162mm............12 Mortise dimensions: These are maximum mortise lengths, unless radius ends are squared with a Corner Chisel. However smaller mortise locks can be accommodated depending on position of their fixing screws. Imperial..............Metric..........Template 5/8" x 2 7/8".....16 x 72mm...........A 5/8" x 4 1/4".....16 x 107mm.........B 3/4" x 3 1/8".....19 x 78mm...........C 3/4" x 4 1/4".....19 x 109mm.........D + These are maximum mortise lengths, unless radius ends are squared with a chisel. However, smaller mortise locks can be accommodated depending on the position of their fixing screws. Use with Trend router bits:- TRE-TR12X1/4TC Two Flute Straight Cutter, 1/4" Shank, 12.0mm Diameter, 19.0mm Cut TRE-TR37X1\2TC Two Flute Straight Cutter, 1/2" Shank, 12.0mm Diameter, 54.0mm Cut
Haggle
If you want a larger quantity than shown on this products price breaks, you can haggle for a volume discount (enter your required number of items), or you can tell us you found this item cheaper somewhere else (enter the web address), or you can simply 'make us an offer!' Don't forget to include your email address so we can respond to your haggle request.
Reviews
There are currently no reviews of this product, why not be the first to write one?
Please note that all reviews are moderated before publishing.
This item is currently out of stock. Regrettably, as we cannot quote an acceptable lead time, we are unable to accept on-line orders.
Currently we have [remaining-stock] units of this item in stock. Any additional quantity ordered will be placed on back order.[lead-time-start] Our normal lead time for this item is [lead-time] working days.[lead-time-end]
We are currently unable to accept on-line orders for more than the available stock quantity of [remaining-stock]. Please use the Haggle tab to enable us to quote price and availability for larger quantities.
You must order at least [min-order-qty] of this product.
You must order at least [min-order-qty] of this product. We currently hold [remaining-stock] in stock. The remainder will be put on back order.[lead-time-start] Lead time [lead-time] day(s).[lead-time-end]
